Deer from cones of good quality. Joint craft with a child: a deer made of cones

What can be made from cones

Cones can not only be combined with interior items, but also create stand-alone decorations. You can also always make funny animals, and the process of creating products will intrigue not only a child, but also an adult.

With the use of cones, you can create:

Decorative compositions that will not only add coziness and New Year's atmosphere, but also refresh the interior. The category of such crafts includes: a wreath on the door, ikebana, topiary, candlestick.
New Year's products. Here the designer's fantasy can unfold in all directions, because you can start with a small composition or even make a tree from cones.
Animal figures. Teddy bear, hedgehog, squirrel, goblin, penguins, snowy owl - a set of such heroes will not leave any child indifferent. And the manufacturing process will give a lot of pleasure and reward with a charge Have a good mood for all day.

Cone processing

Before you start making crafts from cones, you should carefully process the cones:

Contaminated material should be washed and dried naturally.
Clean less contaminated material with a brush.
Unripe and unopened cones should be placed in a slightly heated oven with the door ajar. You will notice that moisture will evaporate from wet buds, and unopened buds will gradually open in the form of spruce branches.

If, according to the idea, closed cones are needed, then in order to avoid opening the petals, you need to keep them in carpentry glue for 30 seconds. To transform, soak the cones in water, and then tie with a thread, giving the desired shape. Craft materials can be left in in kind or cover with artificial snow, varnish, paint. Everything will depend on the intended craft.

Christmas tree made of cones

One of the most popular crafts around the holidays is the Christmas tree. Making it is easy enough. Consider 2 options.

For work we need:

cones;
cardboard;
glue;
coniferous branches or tinsel.

Step-by-step instructions for making a Christmas tree:

Make a cone-shaped base out of cardboard.
Glue the cones to the cone at intervals.
Attach coniferous twigs or tinsel between the cones.
The Christmas tree is ready. It remains to decorate the New Year's beauty.

Materials for making Christmas tree crafts from cones:

cones;
cardboard;
stand;
newspaper or paper;
Super glue.

Step-by-step instruction:

From cardboard, make the base for our Christmas tree in the form of a cone.
For good stability of the structure, put newspaper or paper inside the structure.
Cut out a circle from cardboard or use a wooden stand and attach a cone to it.
Glue the cones to the cone from top to bottom. To avoid large gaps, turn the cones of each subsequent row in the opposite direction.
If you have glued all the cones, then the main part of the craft is finished.

Cone decorations

Increasingly, in houses you can find decorations from cones made for the New Year or Christmas holidays with your own hands. Mostly these are pine or spruce garlands, or trees in pots.

When working with cones, it is very important to note their advantages:

natural material without chemical impurities;
pleasant coniferous smell;
saving money by making decorations from cones.

If desired, you can make almost any toy out of cones, you just need to apply a little imagination and sometimes patience. Making decorations for the Christmas tree - great idea for crafts. After all, you not only make these decorations with your children, but also then dress up a New Year's beauty or decorate interior items with products. From the most elementary crafts, you can make a gnome.

Step-by-step instructions for making a gnome:

Leave the bump unchanged, and take it as the basis of the gnome's body.
Take a chestnut as the basis of the head. Then glue on the beard.
Legs and arms are made of fabric and stuffed with padding polyester or cotton.
Clothes are sewn from felt.
For dwarf girls, a braid of thread should be braided.

The cones, elongated in shape, can serve as decorations in the house or become a wonderful decoration for the Christmas tree. To make exclusive ties for curtains, take a velvet fabric and fasten at the ends along a pine cone.

Another wonderful decoration of our decor can be a New Year's colorful garland of cones. The creation of this craft will not take you much time.

For the garland you will need:

cones (the number depends on the length of the garland);
glue;
rope;
spray paint (you can use any paint);
sequins.

Step-by-step instruction:

Prepare the cones for coloring by first cleaning them.
Spray paint on the bumps.
Sprinkle with glitter afterwards. Wait a little while the material dries.
Take the rope and make marks on it where you will place the bumps.
Leave 10 cm of string to tie the garland.
Put a drop of glue on the base of the cone and glue it to the rope. Hold the bud firmly for 5 seconds for a firm grip.
Do the same for the rest of the cones.
The garland is ready.

Also as christmas decoration at home, crafts in the form of snowflakes made of cones made by hand will look very elegant.

For making snowflakes, it is better to use spruce or long pine cones.

Take 6 cones and glue the bottom sides together. The center of our craft can be decorated with a small paper snowflake or lace. Within 5 minutes, our snowflake is ready.

Christmas wreath of cones

Preparing your home for the holidays begins at the doorstep. The autumn frame of the door is changing winter motifs and takes it to winter fairy tale. Do New Year's wreath not difficult at all.

First you need to cut out the base of the wreath in the form of a circle from plastic, cardboard, flexible branches or wire. Glue small rings on the cones, pre-select the decor for the cones or leave it in original form. Put the cones on the wire by stringing. At the end of the work, twist the edges of the wire and decorate with a large bow.

Newspapers can also be the basis for a festive wreath. Rewind them into a ring and secure with threads in a circle. If there is organza or other material at home, wrap the resulting frame with them. To imitate spruce branches, use a green or light green rain. Glue the cones to the rain and add plastic fruits to the composition.

You can buy a ready-made base for a wreath in stores. Decorate it with acorns, nuts, cones and create your own individual design. You can decorate with any improvised materials: paint, sparkles, ribbons, beads, beads.

How to make a beautiful ball of cones

You can diversify the decor of your interior by making an unusual ball of cones and acorns. It is quite difficult to do it, but if you follow our instructions, then you will cope with the task.

For the base of the ball, make a circle of paper, crumpling it like when making a snowball. Another option for the base could be garbage bag. You can make a ball shape by stuffing the bag with cotton wool, padding polyester or newspaper. The opening of the package should be closed or sealed. The basis for the craft is ready.

We proceed to the main composition and glue the cones, evenly distributing them around the perimeter. After natural drying of the product, the composition is ready.

The final stage is the coating of the ball with varnish or snow. The finished product can be put in a pot or vase, or simply attached with a thread to the ceiling.

Topiary from cones

Good idea to create unusual interior cut trees - topiaries serve. Sometimes they are called trees of happiness and good luck.

To implement the idea you will need:

cones;
gypsum or sponge;
clay or plastic pot;
tree branch;
newspaper ball or flower sponge;
threads;
spray paint.

Step-by-step instruction:

Form a ball of newspaper and wrap it with thread.
Apply glue to the base of the cone, and glue it to the ball as tightly as possible.
Glue the rest of the cones onto the ball. Try to choose buds that are similar in size.
Sharpen the end of the pine branch and make a hole in the bottom of the ball.
Fix the branch in the ball with glue.
Paint the resulting ball with paint. The ball is decorated with dried leaves, branches, beads, colored ribbons.
Prepare the plaster for work: dilute it in a pot, indenting 3-5 cm from the edge.
Insert the branch with the ball into the gypsum solution and fix until dry.
Mask the plaster with small cones or moss.

Making a candlestick from cones

For giving romance and creating a New Year's composition for festive table a lit candle answers beautiful candlestick. The radiance of festive lights will not only add coziness, but also diversify the interior. Even a child can make this accessory with their own hands. The main decor material is cones, and other materials are selected depending on availability.

To create a festive candle you will need:

cones, acorns, chestnuts;
glue;
cardboard circle;
spray paint.

Lay out all the decoration elements on the substrate and paint. Staining should be carried out with open windows or on the street. Glue a candle and prepared decorations in the center of the cardboard circle. A branch of a coniferous tree will look original in the composition.

Another option for creating a candle can be decorating finished candlesticks with cones, twigs. Unusual candles are obtained from glass jars. To do this, pour sugar or artificial snow on the bottom of the jar. Decorate the top with lace and attach a few cones. Treat the composition with an aerosol with snow.

How to make a basket of cones

To make an unusual basket of cones, use our tips.

Materials for creating a basket of cones:

cones;
wire, fishing line;
glue;
cardboard.

The bottom should begin to be tied from the central cone, and so connect 8-16 in a circle, wrapping it with wire or fishing line.

For the second row of buds, make a smaller circle. For a high basket, make 3 circles.

Connect 2 circles of cones together with glue and wire. Make the handle of the basket out of wire and decorate with cones. Weave the handle alternately, turning the cones.

Animals from cones

Study artistic creativity equally useful for both adults and children. Each work uses the principle of combination and play of contrasts. After all, the difference in color, shape and size dictate their own rules in the craft.

Teddy bear made of cones

Materials:

fir cone;
4 half-opened pine cones;
a large open pine cone with a round top;
acorn caps;
alder cones;
awl;
glue;
scissors.

Step-by-step instruction:

An oblong pine cone is the body of a bear cub.
Apply glue to the parts of the scales to be joined.
Connect the parts of the product so that the scales of one cone fix the scales of the other.
Make paws out of pine cones.
Make the hind legs of the bear cub from cones bigger size compared to the front.
The head of the product will be an open pine cone.
From the caps of acorns, make ears and a nose and attach tightly with glue.
From black pepper, make eyes and the tip of the nose.

If a bag of cones has accumulated in the house, then creating a big bear is right for you. The size of the toy is selected according to the number of cones.

Make a bear frame from papier-mâché or polyurethane foam. Stuff the frame with paper, and put heavier material in the legs for stability. Make the top layer of cones and secure with glue. Ears, muzzle make from pompoms.

Hedgehog from cones

You can also make a beautiful hedgehog from cones by adding plasticine.

For the hedgehog you will need:

cones;
plasticine of several colors.

In order to make a hedgehog, all actions are performed in turn according to the instructions:

Take plasticine and blind an elongated muzzle.
Attach it to the base of the cone.
From a different color of plasticine, make a nose, eyes, paws.
Fix them on the craft.
Additionally, make ears out of plasticine and attach them.
The craft is ready.

Nature has always inspired people to be creative, because everything in it is subordinate to it. Having shown a little imagination, you can create not only toys, but also entire mini-cities from natural materials. And the process of creation will unite the family and give everyone the chance to show their design skills.

78 photos of cone craft ideas

In all kindergartens and schools, every year they are asked to make products with my own hands. This is perhaps the most common puzzle for parents.

And you know, it's not even bad at all.

We have a lot of natural material, you need to add a little imagination.

And most importantly, you and your whole family will immerse yourself in the charming world of creativity.

Today, we will look at a natural resource - cones.

It is used not only in school crafts, but also for the interior, Hand-Made designers and others.

Below are photos and detailed diagram several crafts from cones.

What crafts from cones you can do with your own hands

Almost everyone can make crafts from real pine and spruce cones, the main desire and a little imagination.

Using this amazing natural resource, you can do:

Decor elements that will bring a wonderful smell of the forest and a cozy atmosphere into your home.
New Year crafts: holiday wreath, candlestick, Christmas tree, garland, christmas ball and much more.
Interesting crafts of funny animals with children.

Festive wreath

Hand over new Year mood guests can right from the doorstep. For the design of the New Year's wreath we will use:

Cardboard
Spruce or pine branches
cones
Satin ribbon
Not real snow
Dye
glue gun
Decorations for decoration, optional.

In the manufacture of the base, many materials are used.

For example: plastic, cardboard, branches, bending wire, and even newspapers.

We settled on cardboard, it is quite simple and convenient to work with.

On the cardboard we cut out the diameter of the circle that we need. Next, we fasten the branches and cones, forming a symmetrical circle.

After the cones are glued, we continue to decorate our wreath. We take a can of artificial snow and spray the edges of the cones.

If you could not find snow, then you can paint the scales with white or silver paint.

We tie satin ribbon, choose your own color.

Note!

For a more interesting and rich wreath, you can add additional decorative elements: red beads, acorns, nuts, flowers.

Turn on your imagination and you will succeed!

Christmas garland

fast and simple craft in manufacturing.

Material you need:

cones
glue gun
rope
dye
sequins

Step-by-step instructions for crafts:

We prepare the cones in advance, paint them with paint. Paint can be selected in different colors. Or make it in one color that matches the design of your interior. Glitter can also be used for the "elegance" of the product.
We take the rope and make marks the distance between the bumps.
From the edges we leave 10-15 cm each in order to have a place to attach a garland.
Using a glue gun, attach the cones to the rope. Glue along the entire length.
We are waiting for the glue to dry. And voila! Christmas garland ready.

Note!

For kids and schoolchildren, it will be easy to make crafts from cones and plasticine of funny animals: Mishutka, Hedgehog, Squirrel, Owl, etc.

bear

We will use:

cones different types(pine, spruce, open, closed)
Scissors
Plasticine

Step-by-step instructions for making crafts:

Body. From the collected material, we select an elongated pine cone. On the connecting parts of the scales, apply glue. We connect the parts so that the scales fix each other.

Paws. We choose 2 larger cones for the lower legs, and 2 smaller ones for the upper ones. We glue the parts with the body, follow the symmetry.

Head. We make the head from open pine cones. They perfectly convey the fluffiness of the bear's fur. Attach with glue to the base.

Note!

Ears, eyes and nose. It can be made from plasticine, and the tip of the nose, for example, from black peppercorns.

If you want to surprise everyone around, then you can make a big bear. The size of the bear is up to you, the main thing is to dial right amount cones.

You can make the base - the frame of the Mishutka from polyurethane foam, polystyrene or papier-mâché. An excellent solution, for the stability of the product, is to attach something heavy to the bottom.

We cover the frame with cones, and we make the ears and muzzle from plasticine or pompons.

Hedgehog

The easiest children's craft made of cones. For its manufacture, you need only two materials:

cones
Plasticine

Step by step description:

Body. The cone itself is well suited for the base of the craft. If you look closely and turn the scales correctly, they look like hedgehog needles.

Muzzle. Here we need plasticine. From it we make an oblong muzzle. And fix on the craft.

Eyes, nose, paws, ears. We also use plasticine, only of a different color.

As you can see, there is nothing complicated, this cone craft is suitable for kindergarten.

Experiment! Decorate your home with interesting design solutions that you have prepared yourself. Do not forget about the children, they will also be interested in taking part in the creation of a small miracle.

Photo of crafts from cones

With the advent of autumn, schools and kindergartens are actively starting to hold various competitions and exhibitions of crafts made from natural materials. At the same time, works made from cones are practically the most popular at these events. And all because it is a fairly common raw material, from which very unusual figures come out. An example would be the original deer made of cones.

it good craft not only for autumn competitions, but also for winter

How to prepare natural material

Cones are a very common and affordable natural material, but require preliminary preparation, especially if children will work with them.

Attention! If specimens with unopened scales are needed, then it is advisable to collect them in September-October.

After removing the cones from the tree, they are soaked in water, slightly dried and varnished.

In any other case, the collected natural material is soaked in an acetic solution (2 tablespoons of acid are taken per 1 liter of water) for about 20 minutes. Then dried in an oven at a temperature of 95-105 degrees for 30-40 minutes. After varnishing or molar glue. If the weather and time permit, then you can dry the raw materials in natural conditions on the street, but this will take from three to five days.

Step-by-step instructions for making a deer from cones

Autumn crafts in the form of a deer from cones can be done in several ways, using only this natural material or, in addition, using acorns, plasticine, cardboard. And, in order not to think about the idea for a long time, you can rely on existing options, the step-by-step execution of which is presented below.

Deer from cones and acorns step by step

The easiest craft that you can do with your own hands in Kindergarten or school, is a deer made of cones and an acorn. For manufacturing, it is necessary to prepare the following materials:

fir cone;
acorn;
linden seeds;
grape branches;
toothpicks;
glue universal or PVA.

Manufacturing steps:

First, the head of a deer is performed. To do this, two holes are made in the stomach at the base and grape branches are inserted into them. FROM reverse side add a toothpick.
For reliability, each element should be fixed with glue
Further, legs are made from toothpicks and linden seeds by stringing them on the ends on one side.
If there are no linden seeds, they can be replaced with plasticine balls
The resulting elements are connected with a bump, which will serve as the body. They complete the figure by making a muzzle and adding ears and a tail.
For this craft, it is desirable to use an elongated spruce cone
Below are original photos deer from cones and acorns, which can be made based on this master class.
If the neck is also made from a spruce cone, then the deer will be more believable
It is not necessary to remove the plush from the acorn
Chenille wire can be an excellent alternative to twigs.

Little deer made of cones

In addition to a large deer with branched antlers, a deer can also be made from cones. This will require:

spruce and pine cones;
spruce branches;
pistachio shell;
birch bark;
peppercorn;
scissors;
hot glue.

Step by step:

A spruce cone is used as a body. Four branches are inserted into the side between the scales (they should be the same length) - these will be the legs. They also add another branch from the opposite side at an angle, a little shorter, it will act as a neck.
Everything must be fixed with hot glue
Next, proceed to the execution of the head. To do this, a pistachio shell is glued in place of the stalk. And in the center horizontally on the glue fix the birch bark. A nose is made from a peppercorn.
If there is no birch bark, this element can be made of thick cardboard
Then the eyes are made, they are also made of birch bark (thick cardboard), rolling small pieces into rolls. A little black plasticine is inserted inside. The received elements are fixed over the improvised nose. Ears are made from pistachios.
Eyes can be made of plasticine
The figure is completed by gluing a tail from a piece of birch bark and horns from thin twigs.
The finished craft is placed on a stand

Deer made of cones and plasticine

Often, children independently make crafts on the theme of autumn in the form of a deer from cones, but in this case they use plasticine as a fastener. And, to do this job, you can resort to the following master class:

They begin the craft by sculpting the neck of the future deer, with its help they connect both cones.
Circles are glued as eyes different sizes from white and black plasticine.
Then two branches are inserted into the upper cone, and flagella are molded on them from brown plasticine, thereby making the branching of the horns. The ears are also made from the same plastic mass, additionally fixing the branches.
Four branches are inserted into the body below - these will be the legs. Hooves are formed from pieces of black plasticine.
The figure is completed by gluing a tail made of brown plastic mass.

Advice! In order for the branches to hold firmly, they should also be fixed between the scales on plasticine.

The final result and materials for crafts

When making crafts in the form of a deer from cones, it is better to adhere to the following recommendations:

it is better to collect natural material in dry, warm weather;
preference should be given to the cleanest specimens, since resin may be present on the contaminated material, which greatly stains hands and clothes;
if closed specimens are required to complete the figures, then they should be collected in the fall, you can also resort to soaking them, followed by fixing the scales with glue;
to make the craft more colorful, the base can be painted in any color you wish.

In addition to the master classes presented, there are still many ideas for creating deer from this forest material. And for inspiration, you can see the following photos of successful work.

Natural material is an excellent raw material for crafts and toys. It is interesting to collect it while walking with children through the autumn forest. It is no less interesting to make figurines of forest inhabitants from it: an elk or a deer from cones and twigs, from acorns - a hare or an ant.

The combination of different forms, contact with textures trains the child's fingers, develops spatial imagination, lays the first geometric concepts, instills a love of nature.

Variants of execution of a deer from cones

Crafts from the fruits of conifers will be devoted to our story. There is a stable phrase - "noble deer". In fact, the appearance and habits of this animal are very graceful and majestic, full of strength and power. He is the hero of many folk and author's tales; not so long ago, elements of clothing and kitchen utensils were decorated with his images.

Before proceeding with the process of making a toy, you should get to know the properties of the material and the features of its collection better.

The main qualities of coniferous cones:

long shelf life;
ease of processing;
a light weight;
pleasant resinous aroma;
safe use.

Collection and preparation for use have their own characteristics. Consider the basic conditions:

Having prepared everything you need in this way, you can join the work with the children and, step by step, step by step, reveal the secret of how to make a deer.

From plasticine, two fir cones, an acorn and thin twigs, we will make our first handsome man. When the principle of the sequence of actions is mastered, we will move on to creating a whole series of crafts on this topic.

Choosing a convenient place , spread it all necessary tools and materials that will be needed in the process of work:

Starting the main process, distribute the bumps in this way: for the body - more and denser, and for the neck - a little less.

Let's start by attaching the legs. To do this, stick the branches into the scales of the cones in the right places, adjusting if necessary.
Having decided on the limbs, with the help of a glue gun we fix them to the bottom of the body.
Having put the body on its legs, we begin to draw out the neck and head. Let's free one end of the second cone from unnecessary scales so that a small depression forms in the middle, where the deer's head will be planted.
Apply a small amount of glue there and put an acorn on it with a blunt end. Press lightly and hold for a while to bond.
Connect both parts. Spread glue on the wide base of the body and attach the neck with the head perpendicular to it.
Roll up very small balls from plasticine, flatten them and form eyes. Another one will go to the nose, which is at the narrow tip of the acorn.
Let's make a ponytail: shape a small plasticine bar into a tail and attach it to the narrow part of the torso.
Horns can be made in two ways - openwork miniature branches glued to the head or molded with plasticine. Both will look very harmonious, but if we take into account the development fine motor skills child, the second option will be more useful - modeling.
We finish the craft by putting it on hooves, which serve as a reliable support for the toy. We roll four balls of plasticine of the same size, flatten them slightly on both sides and stick the legs into them. Our deer will stand firmly on its feet.

The picture shows an approximate diagram of the whole process:

This cute, intricate toy can become a character in children's role playing or be used as original decoration New Year's table.

Continuing the theme of decor, consider other variations of deer crafts made from cones.

Master class: deer from cones

Unusual Christmas decorations deer muzzles made from one medium-sized spruce fruit can become. Harmoniously inscribed in their coniferous environment, they will give the green beauty a natural festive look.

A deer created from pine fruits will also not leave anyone indifferent, especially children, since only baby deer can be made from spherical pine cones.

So, for the muzzle you will need:

Do not take on the whole process, entrust the child with simple, feasible areas of work, such as cutting out ears, planting parts on glue, tying a bow.

Let's analyze the entire manufacturing procedure step by step:

to begin with, we will agree that the blunt end of the object will be the top of the head, and the sharp end will be the nose;
apply several windings on the top of the head with a colored thread for knitting, dropping glue in some places. This will be a deer hat;
trim it with any stuffed material - synthetic winterizer or holofiber. You should get a headdress that looks like a Santa Claus hat or a gnome cap. If you like to bring everything to perfection, then crochet such a cap-hat in advance;
top decorate with a mini-ball, a pom-pom made of threads, a brush;
bend the horns from the fleecy wire. If one is not available, you can pick up and attach ordinary twigs;
glue the ears cut out in the shape of a leaf under the horns on both sides;
attach the eyes to the right place. They should be located below, slightly stepping back from the edge of the cap;
decorate the nose of a deer with a ball;
glue a bright ribbon to the center of the crown, tie a bow.

The original decorative element - the muzzle of a deer - is ready.

Toy "Deer"

The baby deer craft consists only of natural raw materials, with the exception of small elements:

two pine cones of various shapes and sizes - one oblong large, the other cone-shaped smaller;
2 branches and 4 twigs;
joiner's glue;
wire cutters;
bead;
mini-bell, ribbons for decoration.

To make such a toy is simple and fast.- in an hour you can make a whole deer family. See for yourself:

The first step is to turn on the imagination and work on the appropriate layout of the two blanks - the head and the body.
When you find an interesting, in your opinion, angle of the head and the scales of the cone will match like puzzles, glue the structure and press it with your fingers for a while until sufficient adhesion.
The next step is the legs. They should not be made short, since a deer, even a young one, is an animal famous for its graceful and fast legs. Having picked up suitable rods, carefully align them along the length with wire cutters and determine in their place. To make the figure stable, glue the legs in the form of triangles or spacers. Also make sure that they are not too thin, unable to support the weight of the body.
The horns are selected from delicate, thin and openwork twigs and attached with an adhesive solution to the head. You can tie them on if you want. small bell or ribbons.
Designate the nose with a red bead.

In addition to the craft, apply acrylic paint in a dry brush style. Dilute the ocher shade of color. Dip the brush into it, wipe off the excess on the paper, and with the minimum that remains on the brush, color with tangential movements.

To expand the selection of toys will allow a product made of a material of a different texture. It's about the paper deer. We will tell you where it can be applied and how to do it.

If a deer made of cones is within the power of a child of garden age, then papier-mâché is a more difficult task that a schoolboy can handle primary school. Such an activity for him is an excellent preparation for technology lessons, where the guys create crafts of varying complexity.

Papier-mâché is a hobby somewhat reminiscent of sculptural art. A mixture of paper pulp and adhesive, from which any shape and composition can be created.

We will make an unusual deer using the “papier-mâché on a frame” technique, decorate it and add it to our collection.

To do this, we will arm ourselves with such materials and tools:

wire of different diameters - thicker for the body and legs, thin for the horns.
small secateurs;
pliers;
a roll of the cheapest toilet paper;
PVA glue, half diluted with water;
tassel;
acrylic paints.

Before work, cover the surface of the table with an oilcloth or a special board, as work will be carried out with a soiling mass.

Execution steps:

From a thicker wire, twist a schematic skeleton of a deer. Start at the head, move on to the back and tail. You will get something like this:
Then we wind the legs, pressing the place of twisting with pliers to fix it on the frame so that they do not scroll. Cut off the excess length with secateurs.
Actually, using the shape of the horns, you can create a deer or an elk. All other parts are more or less the same in these animals. Do not forget that the horns are made with thin wire.
The skeleton of the future toy is made. Let's move on to the next part - wrapping paper. A schoolboy of 8-9 years old will be happy to do such a simple and fun job.
We will start the winding from the place where the widest, most voluminous part is supposed to be - this is the body. In the process, the paper should be slightly wrinkled without pulling it. It is desirable to carry out all the work with a solid tape, without breaks. But if this happens, do not despair - the torn tip can be pressed and hidden under a new one, then continue the procedure.
From the torso we smoothly move to the hind legs, then to the front legs, carefully closing all the protruding ends of the wire.
Having wrapped the entire form (the horns remain intact), we cut off the end of the paper and hide it under any paper strip. This baby turned out like this:
Having increased the mass, we proceed to fix it with the help of an adhesive composition. Dilute PVA in half with water. With a brush, we carefully go through all the cracks and holes. If large holes and dents are found, we close them immediately with crumpled paper and generously lubricate with a solution. The surface of the toy should be relatively flat.
Let's dry the craft for 12-15 hours.
The final step will be the coloring process. Take advantage acrylic paints or spray paint. The color scheme can be any: from light golden hues to silver. After all, such a toy will become a symbol of any winter celebration.

Highlight the horns and legs with sparkles, and you will get a character from Bazhov's fairy tale - Silver Hoof himself. Perhaps this talisman will bring happiness to your home.

Attention, only TODAY!

It seems that we can no longer imagine our life without bumps. As children, we love to collect cones and make crafts out of them. In schools and kindergartens, every autumn should be celebrated original crafts from natural material.

Cones in this case become our salvation. What only beautiful work not obtained from cones. It can be complex compositions, small details and decorative elements.

Going to the nearest forest, pick up beautiful cones. Rinse and dry them so as not to be afraid and give them to children for crafts. If you need open cones, then you need to put them in a warm place or in the oven for a few minutes.

In order for the cone to be closed, put it in water for a while and varnish it. Then it won't open.

A deer can be a wonderful decoration for a Christmas tree or an addition to an autumn composition.

Necessary materials:

Cone
Five straight branches
Two branches with branches
Two peppercorns
Acorn
Two seeds
brown plasticine

We need a bump for the body. Glue 4 balls of plasticine to it for attaching the legs and one ball of plasticine on the other side

We use straight sticks as legs and neck

They are just attached to plasticine balls.

Make a tail from a willow branch

Make 2 holes in the acorn's head to put the horns in.

For horns, find a couple of branches with beautiful branches.

Attach them with plasticine or glue to the acorn cap

We make ears from sunflower seeds, eyes from peas, a nose from rowan berries.

Attach the head to the neck

Deer from cones: step by step instructions

Creating a deer figurine is not difficult and will only take a few minutes.

We will need two cones of different sizes, twigs, a glue gun, scissors, a red pompom for the spout.

For the body, choose a larger oblong bump, and the second bump should be smaller for the head.

For the horns, we need branches with branches, and for the legs - dense and even sticks.

Attach the head to the body with glue. Cut the branches for the legs so that it can stand steadily on the surface.

Attach the horns to the head.

Glue the red pompom on the head like a nose.